Everything Dinosaur News and Updates

9 05, 2021

Rare Rebor Models in Stock

By Mike|2024-05-26T09:23:38+01:00May 9th, 2021|Categories: Adobe CS5, Dinosaur Fans, Everything Dinosaur News and Updates, Everything Dinosaur Newsletters, Everything Dinosaur Products, Main Page, Photos of Everything Dinosaur Products, Press Releases|0 Comments

Subscribers to Everything Dinosaur’s customer newsletter were tipped off about stock of rare Rebor prehistoric animal figures and replicas. Limited-edition and special production runs of several Rebor figures had been organised and once the current stock had sold, many of these items would not be available again.

Rare Rebor Models

For example, the science fiction/fantasy Rebor Oddities Specimen: G-2016 embryo in resinite has been limited to a single production run and only 500 of these amazing replicas have been made.

Picture credit: Everything Dinosaur

Rebor Oddities Specimen: G-2016 Embryos

The Everything Dinosaur newsletter also featured the G-2016 Embryo in epoxide and the G-2016 Embryo in bakelite. Like the resinite figure, only 500 of each of these replicas have been produced and newsletter subscribers were given the opportunity to snap up a figure before they sold out.

Rebor Oddities Specimen Embryos — Only 500 Rebor Oddities Specimen G-2016 embryos (bakelite and epoxide) have been produced. There are no plans to make any more once the current stock has been sold. Picture credit: Everything Dinosaur.

Picture credit: Everything Dinosaur

A spokesperson from Everything Dinosaur commented:

“These Rebor G-2016 figures are beautifully crafted science fiction replicas with engraved text and science fiction symbols and they would be a highlight in any model collection. We have had lots of sales in Asia, but we wanted to hold a few back so we could offer these limited edition figures to our newsletter subscribers.”

The Everything Dinosaur website: Dinosaur Models and Toys.

Compsognathus longipes Dissection Figures

Rebor has built a deserved reputation for their innovative and unusual figures. As well as introducing the embryos, Rebor commissioned a special production run of life-size Compsognathus dissection specimens. Two versions were produced, one of them being the limited edition, highly stylised “Victorian Goth” specimen. Only 500 of these figures have been made, the vast majority of these were pre-sold, however, Everything Dinosaur has held a small number in reserve so we could offer these figures to our subscribers.

Rebor Compsognathus Dissection Replicas — The Rebor Compsognathus longipes dissection replicas including the limited edition Victorian Goth version make an appearance in the latest Everything Dinosaur customer newsletter. Picture credit: Everything Dinosaur.

Picture credit: Everything Dinosaur

Rebor Abelisaurid Dinosaurs

Rebor is best known for their dinosaur models. Team members thought that they could not feature Rebor without at least drawing attention to a couple of dinosaurs and with the arrival this week of the abelisaurid pair Carnotaurus and Ekrixinatosaurus it seemed fitting to include these 1:35 scale replicas in our newsletter offering. The Rebor Carnotaurus rex “Crimson King Requiem” is a reference to the apex predator position held in southern hemisphere Late Cretaceous palaeoenvironments by members of the Abelisauridae, including Carnotaurus sastrei.

The 1:35 scale model of Ekrixinatosaurus (E. novasi) represents another South American abelisaurid. Named and described in 2004, palaeontologists are uncertain as to the size of this “bruiser”. The skull was disproportionately large and this dinosaur was particularly robust – very helpful if you coexisted with Giganotosaurus, one of the largest theropod dinosaurs known to science.

Rebor 1:35 scale Carnotaurus and Ekrixinatosaurus — *A pair of ferocious abelisaurids! The Rebor Carnotaurus rex “Crimson King Requiem” (right) and the new Rebor Ekrixinatosaurus “Epitaph” model (left). Picture credit: Everything Dinosaur.*

Picture credit: Everything Dinosaur

Subscribe to Everything Dinosaur’s Newsletter

The Everything Dinosaur email newsletter is sent out periodically, it is free to join, there are no subscription fees to pay. To subscribe to the Everything Dinosaur newsletter simply email us and we will do the rest: Contact Everything Dinosaur.

To view the range of Rebor models and replicas in stock at Everything Dinosaur: Rebor Dinosaurs and Prehistoric Animals.

27 04, 2021

A New PNSO Paul the Allosaurus Figure

By Mike|2024-05-25T18:21:07+01:00April 27th, 2021|Categories: Adobe CS5, Dinosaur Fans, Everything Dinosaur News and Updates, Everything Dinosaur Products, Main Page, Photos of Everything Dinosaur Products, Press Releases|0 Comments

Everything Dinosaur can confirm that PNSO intend to introduce a model of an Allosaurus into their mid-size model range. We expect this exciting new dinosaur, an iconic member of the dinosaur-dominated biota of the Morrison Formation to be in stock at Everything Dinosaur in the summer (2021).

Paul the Allosaurus

This new theropod replica is one of a plethora of model introductions that PNSO and Everything Dinosaur have announced over the last few months. Like the majority of the PNSO theropod figures in the larger ranges, this Allosaurus model will also have an articulated lower jaw.

Three Species in the Genus

The genus was first erected in 1877 (Othniel Charles Marsh), one of the many dinosaur genera named as fossils from the Morrison Formation of the western United States began to be uncovered and sent east for study. Most palaeontologists recognise three species in this genus, the most recent to be named Allosaurus jimmadseni was only formally scientifically described last year (2020). To read more about A. jimmadseni: A New Species of Allosaurus (A. jimmadseni).

Bilateral Crests Suggest Allosaurus jimmadseni

The picture (above) shows a close view of the head of the new PNSO Allosaurus model. A pair of bilateral nasal crests that run from the nostrils to the eye socket (orbit) can clearly be seen. This feature is absent in Allosaurus fragilis and since PNSO intended to introduce this model to celebrate the dinosaurs of the Morrison Formation, we have concluded that this figure is intended to represent Allosaurus jimmadseni.

Paul the Allosaurus Model Measurements

Dinosaur model fans and collectors like to know about the size of any new figures and details of any potential scale. Although PNSO do not declare a scale for their model in the mid-size model range, the figure does measure 25 cm long and a potential scale can be calculated. For example, if the new PNSO Allosaurus is indeed a replica of A. jimmadseni, then if this dinosaur was around 8 metres in length, this suggests a scale of approximately 1:32.

PNSO Paul the Allosaurus dinosaur model measurements — The PNSO Paul the Allosaurus measures 25 cm long and it has a height of approximately 9 cm. Based on an Allosaurus fragilis being around 12 metres in length, team members at Everything Dinosaur estimate this model is in approximately 1:48 scale. However, should this model represent Allosaurus jimmadseni, then the scale would be different. The exact size of A. jimmadseni is not known but at an estimated 8 metres long, the PNSO figure would represent a dinosaur in 1:32 scale.

Checking on Availability

A spokesperson from Everything Dinosaur confirmed that there had been a meeting about PNSO yesterday but when Allosaurus would be in stock had not yet been confirmed. Team members anticipate that Paul the Allosaurus should be available in the summer (2021), but they were currently checking to see if more information could be provided.

The Everything Dinosaur website: Dinosaur Models and Toys.

*The PNSO Paul the Allosaurus product packaging.*

The PNSO Paul the Allosaurus model will be supplied with a transparent support stand. It along with the recently introduced Stegosaurus figure celebrate the dinosaur biota associated with the famous Morrison Formation of the western United States.

PNSO Morrison Formation Dinosaurs — *PNSO celebrating dinosaurs known from the Upper Jurassic Morrison Formation of western North America.*

To view the extensive range of PNSO models currently available from Everything Dinosaur: PNSO Prehistoric Animal Models and Figures.

24 04, 2021

Preparing for a New Pachycephalosaurus

By Mike|2024-05-25T14:51:11+01:00April 24th, 2021|Categories: Dinosaur Fans, Everything Dinosaur News and Updates, Main Page, Photos of Everything Dinosaur Products, Photos/Pictures of Fossils, Press Releases|0 Comments

As part of our commitment to education and science outreach activities, team members at Everything Dinosaur have been busy amending and updating information boards for a UK-based exhibitions company.

One of the many dinosaurs that we have been working on is Pachycephalosaurus (P. wyomingensis).

PNSO Pachycephalosaurus dinosaur model. — Austin the Pachycephalosaurus (P. wyomingensis). Everything Dinosaur’s work on the Pachycephalosaurus display boards coincided with the announcement from PNSO of a new for 2021 Pachycephalosaurus dinosaur model.

The picture (above) shows a PNSO Pachycephalosaurus model.

To view the range of PNSO prehistoric animal figures: PNSO Prehistoric Animal Models and Figures.

Austin the Pachycephalosaurus

The recently announced Austin the Pachycephalosaurus (PNSO), is due to be in stock at Everything Dinosaur later this year. The display boards we have been working on have to be finished in just a few days so they can be produced in time for outdoor events that are due to start in the UK next month (late May 2021).

A replica skull of Pachycephalosaurus wyomingensis. — Pachycephalosaurus wyomingensis replica skull. Everything Dinosaur team members took this photograph of a replica the skull of the North American member of the Pachycephalosauridae on a visit to the Oxford University Museum of Natural History. *Picture credit: Everything Dinosaur.*

Picture credit: Everything Dinosaur

Focusing on the Cranium and Taxonomy

The information we have provided to the exhibitions company focuses on the story of this dinosaur’s discovery and looks at some of the theories that have been proposed to explain the very thick skull bones, which in some specimens are more than 25 cm thick.

We have also provided information on Dracorex and Stygimoloch in a bid to explain that many palaeontologists do not think that these genera are valid. It is thought that Dracorex and Stygimoloch may represent juvenile specimens of P. wyomingensis.

Visit Everything Dinosaur’s award-winning website: Everything Dinosaur.

23 04, 2021

PNSO to Introduce a New Yutyrannus Model

By Mike|2024-05-25T14:49:26+01:00April 23rd, 2021|Categories: Adobe CS5, Dinosaur Fans, Everything Dinosaur News and Updates, Everything Dinosaur Products, Main Page, Photos of Everything Dinosaur Products, Press Releases|0 Comments

Today, might be St George’s Day (April 23rd), but team members at Everything Dinosaur have stopped all talk of “dragons” to post up news about a replica of the “feathered tyrant” being introduced by PNSO.

Yinqi the Yutyrannus (Y. huali) model in the PNSO mid-size model range has been announced in a joint release by Everything Dinosaur and representatives of the Chinese company.

*The new for the summer of 2021 PNSO Yinqi the Yutyrannus dinosaur model.*

The “Feathered Tyrant”

Known from three, nearly complete specimens found in Lower Cretaceous sediments in Liaoning Province, north-eastern China, Yutyrannus (Y. huali) translates as “beautiful, feathered tyrant”. Regarded as a basal member of the Tyrannosauroidea (primitive member of the tyrannosaur lineage), some of the fossilised feathers are more than fifteen cm long, demonstrating that even some extremely large theropods were feathered.

PNSO Yinqi the Yutyrannus

The model measures around 25.5 cm long and the highest part of the raised tail is 12.3 cm off the ground. This is a beautifully detailed dinosaur model and a welcome addition to the PNSO mid-size model range.

The PNSO Yinqi the Yutyrannus will be available from Everything Dinosaur in the summer (estimated around July 2021).

With an Articulated Lower Jaw

The new PNSO tyrannosaur replica joins versions of Tyrannosaurus rex and Qianzhousaurus (Q. sinensis) in PNSO’s tyrannosaur range (mid-size models and larger). Just like the original “Wilson” the T. rex and A-Shu the Qianzhousaurus, Yinqi the Yutyrannus will have an articulated lower jaw.

PNSO Yinqi the Yutyrannus huali Dinosaur Model — *PNSO Yinqi the Yutyrannus with an articulated jaw.*

Celebrating the Jehol Biota

The introduction of this new figure (summer 2021), continues the trend whereby the Chinese manufacturer celebrates the dinosaur fauna associated with a specific geological formation. In this case, it is the Yixian Formation that forms one of the constituents of the famous Jehol biota.

PNSO Yinqi the Yutyrannus huali model — *The PNSO Yutyrannus and the Microraptor are replicas of dinosaurs associated with the Jehol biota.*

A spokesperson from Everything Dinosaur commented:

“PNSO have ambitious production plans for quarter 2 and 3 of 2021. We at Everything Dinosaur know what’s coming and we think dinosaur fans and model collectors are going to be enthralled with PNSO’s product offerings.”

The Everything Dinosaur website: Dinosaur Models and Toys.

PNSO Yinqi the Yutyrannus product packaging — *The PNSO Yinqi the Yutyrannus is supplied with a small, transparent stand that when placed in the middle of the replica’s chest helps to support this dinosaur figure.*

Supplied with a Support Stand

PNSO Yinqi the Yutyrannus will be supplied with a small, transparent stand that when placed in the middle of the model’s chest will help to support this dinosaur in its dynamic pose.

The PNSO Yutyrannus will be available from Everything Dinosaur in the summer of 2021. To view the current range of PNSO models and figures available from Everything Dinosaur: PNSO Dinosaur and Prehistoric Animal Models.

22 04, 2021

Studying a Special Spinosaurus

By Mike|2024-05-25T14:47:34+01:00April 22nd, 2021|Categories: Adobe CS5, Dinosaur Fans, Educational Activities, Everything Dinosaur News and Updates, Main Page, Photos/Pictures of Fossils|0 Comments

Team members at Everything Dinosaur have been asked to cast their expert eyes over a display board that focusses on Spinosaurus (Spinosaurus aegyptiacus). Spinosaurus has become an increasingly popular dinosaur with children since it featured as the main protagonist in the third of the “Jurassic Park” films – “Jurassic Park III” that was released in 2001.

The public profile of this dinosaur was also boosted when it was featured in the first episode of the six-part BBC documentary series “Planet Dinosaur” that first aired ten years ago (2011).

“Spiny or Thorn Lizard”

Known from the Late Cretaceous of North Africa (Cenomanian faunal stage), Spinosaurus (S. aegyptiacus) is regarded by many palaeontologists as the largest theropod dinosaur known to science. Its exact size remains controversial with various size estimates and assessments of body mass having been made. Several studies have indicated that this carnivore could have reached lengths in excess of 15 metres and perhaps weighed as much as 20 tonnes.

*The beautiful markings on the Wild Safari Prehistoric World Spinosaurus dinosaur model. Picture credit: Everything Dinosaur.*

Picture credit: Everything Dinosaur

The picture (above) shows the Wild Safari Prehistoric World Spinosaurus figure. The model makers depicted this dinosaur as a quadruped. They took great care to reflect the known science regarding the huge sail. The designers created the model after studying Spinosaurus fossils.

To view the Wild Safari model range: Wild Safari Prehistoric World Models.

A Dinosaur that Behaved Like a Crocodile

Much of what we know about Spinosaurus comes from research carried out over the last twenty-five years. Although it was named and scientifically described over a hundred years ago.

Spinosaurus (S. aegyptiacus), was described in 1915 by the famous German palaeontologist Ernst Stromer von Reichenbach based on fragmentary fossils found in series of expeditions to the Bahariya depression in the Western Desert of Egypt. Much of the fossil material collected during these expeditions was destroyed by allied bombing raids in World War II.

Everything Dinosaur team members have updated the information panel for the exhibition. The panel provides readers with details of some of the most recent research that suggests that Spinosaurus was quadrupedal and semi-aquatic.

Swimming Spinosaurus 2020 — *A pair of spinosaurids hunting the giant, prehistoric sawfish Onchopristis. Picture Credit: Davide Bonadonna/National Geographic.*

The function of the enormous sail remains a mystery. This structure was formed by elongated spines that were extensions of the back vertebrae. The sail may have played a role in helping this large dinosaur keep cool (thermoregulation). It also may have played a role in visual communication between spinosaurs. The spines could even have supported a fleshy hump that stored reserves of fat. The display panel we have helped to prepare will help to tell the story of how our perceptions regarding “Spiny or Thorn Lizard” has changed over the years.

Visit the award-winning Everything Dinosaur website: Everything Dinosaur.

21 04, 2021

Preparing for a New Avaceratops

By Mike|2024-05-25T14:45:33+01:00April 21st, 2021|Categories: Adobe CS5, Dinosaur and Prehistoric Animal Drawings, Dinosaur Fans, Everything Dinosaur News and Updates, Everything Dinosaur Products, Main Page, Photos of Everything Dinosaur Products, Press Releases|0 Comments

Everything Dinosaur team members are eagerly awaiting the arrival of the Beasts of the Mesozoic Wave 2 ceratopsian figures. There are going to be another nine articulated, horned dinosaur models added to this exciting range and the shipment of models is already on the water heading to our warehouse. However, unlike other companies, we like to offer a little more with every Beasts of the Mesozoic model that we supply. Everything Dinosaur customers receive a fact sheet to accompany their Beasts of the Mesozoic ceratopsian. As a result, we have been reviewing existing data sheets and preparing three new ones specifically for Spiclypeus (S. shipporum), Wendiceratops (W. pinhornensis) and Avaceratops (A. lammersi).

Our work also involves us commissioning illustrations of dinosaurs so we can include a scale drawing in our fact sheet.

Avaceratops Scale Drawing — *A scale drawing of Avaceratops lammersi known from the Judith River Formation of Montana (USA). Picture credit: Everything Dinosaur.*

Picture credit: Everything Dinosaur

Helping to Educate and Inform

A spokesperson from Everything Dinosaur commented:

“We might have had to stop our school visits due to the impact of the COVID-19 pandemic, but we still have at the very heart of this business the ethos of helping to educate and inform. For all the Beasts of the Mesozoic articulated figures we have a fact sheet available that tells customers something about the science behind the model. We have all the first wave of the Ceratopsia covered and shortly we will have completed our work on the data sheets required for Wave 2.”

Visit the Everything Dinosaur website: Dinosaur Toys and Prehistoric Animal Figures.

The Beasts of the Mesozoic Avaceratops lammersi articulated dinosaur model. Part of the second wave of Beasts of the Mesozoic ceratopsians, the Avaceratops has nineteen points of articulation and is supplied with an Everything Dinosaur fact sheet.

The spokesperson added that these new articulated dinosaur models would be in stock at Everything Dinosaur in early May (2021).

To view the range of Beasts of the Mesozoic models and replicas available from Everything Dinosaur: Beasts of the Mesozoic “Raptors” and Horned Dinosaurs.

18 04, 2021

Amending an Amazing Amargasaurus

By Mike|2024-05-25T14:22:16+01:00April 18th, 2021|Categories: Dinosaur Fans, Everything Dinosaur News and Updates, Main Page, Photos of Everything Dinosaur Products|0 Comments

Team members at Everything Dinosaur have been asked to cast their eyes over a display panel being prepared to accompany an exhibition featuring the bizarre South American sauropod Amargasaurus.

"Lucio" the PNSO Amargasaurus model. — *PNSO Amargasaurus “Lucio”. Everything Dinosaur team members have been busy updating a display board for an exhibition that will feature a life-size replica of Amargasaurus.*

The image (above) shows a PNSO Amargasaurus model. To view the PNSO dinosaur range: PNSO Dinosaur Models.

“Reptile from Amarga Canyon”

Known from a single, partial skeleton discovered in 1984 in northern Patagonia (La Amarga Formation), Amargasaurus was related to Diplodocus although it was much smaller measuring around 10 metres in length with an estimated weight of approximately 5 tonnes.

*Papo Amargasaurus dinosaur model. Several model manufacturers have produced replicas of Amargasaurus.*

The Papo range of prehistoric animal models: Papo Dinosaur Models and Figures.

Unlike most other sauropods, the neck was disproportionately short and it was probably a specialist browser of small trees and bushes, a feeding strategy that prevented it from competing directly with the numerous other types of sauropod dinosaur that shared its habitat.

This dinosaur had two rows of tall, thin spines sticking up from the vertebrae that ran from the top of the head down to the base of the short neck. These spines then tapered into a single row of smaller spines that continued down the animal’s back to the tail. When first scientifically described in 1991, it was suggested that these spines were defensive weapons used to deter attacks from predators or in combat between rivals. Some palaeontologists have suggested that these spines supported skin membranes that formed two parallel sail-like structures. These sails could have played a role in thermoregulation, visual communication between herd members or perhaps they were used in courtship displays.

Visit the Everything Dinosaur website: Dinosaur Models and Toys.

The discovery in northern Patagonia, of the closely related Bajadasaurus with its equally spiky array of neck spines that curve forward towards the head has led some palaeontologists to conclude that the neck spikes on these dinosaurs were indeed primarily defensive structures.

Bajadasaurus skeletal reconstrution and fossil find location. — *A skeletal reconstruction of Bajadasaurus, location map of fossil finds and drawing of the fossil material in situ.* *The discovery of the closely related Bajadasaurus has led some palaeontologists to conclude that the elaborate neck spines associated with Amarga*saurus were primarily defensive structures. Picture credit: Gallina et al published in Scientific Reports.

17 04, 2021

First New for 2021 CollectA Models in Stock

By Mike|2024-05-25T14:09:23+01:00April 17th, 2021|Categories: Adobe CS5, Dinosaur Fans, Everything Dinosaur News and Updates, Everything Dinosaur Products, Main Page, Photos of Everything Dinosaur Products, Press Releases|0 Comments

The first of the new for 2021 CollectA prehistoric animal models are in stock at Everything Dinosaur. Team members have been busy contacting all those customers who wanted to be emailed when these figures came into stock.

New for 2021 CollectA dinosaur models — The first five new for 2021 CollectA prehistoric animal models are in stock at Everything Dinosaur. The new for 2021 figures are the Neovenator scenting prey (top left), CollectA Deluxe Mamenchisaurus in 1:100 scale (top right), the Age of Dinosaurs Popular range Kamuysaurus (middle) and the Megalosaurus in ambush (bottom left) and the Brontosaurus prey (bottom right). Picture credit: Everything Dinosaur.

Picture credit: Everything Dinosaur

Visit the Everything Dinosaur website: Dinosaur Figures and Models.

Mamenchisaurus (CollectA Deluxe)

By far the largest figure, in fact the biggest dinosaur model that CollectA will introduce this year is the Mamenchisaurus. It measures around 40 cm in length and that well-proportioned and detailed head stands some 24 cm high. CollectA state that this figure is in approximately 1:100 scale, so the figure represents a specimen around 40 metres long. This suggests that when creating this replica, the design team at CollectA had in mind one of the larger species known from this genus such as Mamenchisaurus sinocanadorum.

CollectA Deluxe Mamenchisaurus dinosaur model. — *CollectA Deluxe Mamenchisaurus a 1:100 scale replica of an Asian sauropod.*

A spokesperson from Everything Dinosaur praised CollectA for adding a model of this sauropod to their model range.

Brontosaurus Prey

CollectA know what fans of dinosaurs like to see, lots of gore and blood and the new for 2021 CollectA Brontosaurus prey does not disappoint. It has been beautifully sculpted and depicts a deceased sauropod that is in the process of being consumed by a large theropod dinosaur, perhaps a member of the allosaur family. This would be appropriate as last year, CollectA introduced a model of an Allosaurus roaring.

CollectA "Roaring" Allosaurus model. — *The CollectA “Roaring” Allosaurus dinosaur model. This figure would make an ideal partner for the recently introduced CollectA Age of Dinosaurs Popular range Brontosaurus prey.*

Kamuysaurus japonicus

Formally named and described in 2019, Kamuysaurus continues the CollectA trend to include dinosaurs known from Japan in their product portfolio. Although known only from a single specimen, the fossils found represent a considerable proportion of the skeleton and as a result Kamuysaurus has been confidently assigned to the Edmontosaurini tribe.

CollectA Kamusaurus dinosaur model. — *The CollectA Age of Dinosaurs Kamuysaurus model. A replica of a hadrosaurid from the Late Cretaceous of Japan.*

Two British Dinosaurs

The other two models that have just arrived in stock are the Megalosaurus in ambush figure and the Neovenator scenting prey. Both these dinosaurs are associated with Britain, although Megalosaurus has become a bit of a taxonomic waste basket over the last 200 years or so since this dinosaur was scientifically described.

*The new for 2021 CollectA Megalosaurus in ambush dinosaur model. Available from Everything Dinosaur.*

*The new for 2021 CollectA Neovenator scenting prey dinosaur model.*

Replacing Earlier CollectA Models

The new for 2021 Megalosaurus and the new Neovenator figures replace earlier sculpts in the CollectA Age of Dinosaurs Popular range that were introduced around ten years ago. The models have been updated to more accurately represent the known skeletal material and the dinosaurs have been given lips to reflect the current debate about this amongst palaeontologists.

To view the CollectA Deluxe Mamenchisaurus and the other CollectA Deluxe prehistoric animal models: CollectA Deluxe Prehistoric Animals and Dinosaurs.

To view the other new for 2021 CollectA figures: CollectA Age of Dinosaurs Popular range.

16 04, 2021

PNSO Austin the Pachycephalosaurus

By Mike|2024-05-25T14:06:45+01:00April 16th, 2021|Categories: Adobe CS5, Dinosaur Fans, Everything Dinosaur News and Updates, Everything Dinosaur Products, Main Page, Photos of Everything Dinosaur Products, Press Releases|0 Comments

PNSO have announced that they will be adding a model of the bone-headed dinosaur Pachycephalosaurus to their mid-size model range. Say hello to Austin the Pachycephalosaurus, this exciting new for 2021 dinosaur model is likely to be in stock at Everything Dinosaur in the early summer.

*The new for 2021 PNSO Austin the Pachycephalosaurus dinosaur model.*

Pachycephalosaurus wyomingensis

This new figure is a replica of Pachycephalosaurus wyomingensis, the largest known member of the bone-headed dinosaur group (Pachycephalosauridae). The dinosaur model shows meticulous detail and has been exquisitely painted.

Model Measurements and Scale?

Austin the Pachycephalosaurus measures 17. 8 cm long and its beautifully detailed head is a fraction under 7 cm off the ground. PNSO does not publish a scale for their mid-size figures but based on an estimated length of P. wyomingensis of approximately 4.6 metres, this figure is in around 1:26 scale.

PNSO Austin the Pachycephalosaurus model measurements — *The PNSO Austin the Pachycephalosaurus dinosaur model measurements and known skeletal material. The Pachycephalosaurus figure measures 17.8 cm long and it has a head height of 6.6 cm.*

*Austin the PNSO Pachycephalosaurus (dorsal view).*

The Famous Hell Creek Formation

Pachycephalosaurus fossils (mostly cranial material), are associated with the famous Hell Creek Formation, although they are exceptionally rare compared to other ornithischians such as members of the Ceratopsidae and hadrosaurids. Austin the Pachycephalosaurus joins Doyle the Triceratops, Sede the Ankylosaurus and Wilson the T. rex dinosaur models in the PNSO portfolio that celebrates the dinosaur fauna of Hell Creek.

Dinosaurs of the Hell Creek Formation — *PNSO figures that celebrate the dinosaur fauna of the Hell Creek Formation.*

Available in the Summer

A spokesperson from Everything Dinosaur commented that this figure was due to be announced at 10am on the 17th of April (Beijing time), but as images had been already leaked on-line by other companies, Everything Dinosaur received permission from PNSO to publish details about Austin the Pachycephalosaurus earlier than scheduled.

Visit the Everything Dinosaur website: Dinosaur Toys and Models.

The PNSO Austin the Pachycephalosaurus is likely to be in stock at Everything Dinosaur in the summer of 2021.

To view the current range of PNSO models and figures available at Everything Dinosaur: PNSO Dinosaur and Prehistoric Animal Models.

15 04, 2021

Unique, Limited-edition Rebor Compsognathus Replicas Further Delayed

By Mike|2024-05-25T14:04:54+01:00April 15th, 2021|Categories: Dinosaur Fans, Everything Dinosaur News and Updates, Main Page, Photos of Everything Dinosaur Products, Press Releases|0 Comments

The Rebor Compsognathus longipes stained dissection replicas have been delayed. Neither the limited-edition C. longipes Victorian Goth stained dissection specimen or the other Rebor Oddities Compsognathus longipes preserved dissection specimen are going to be available tomorrow (16th April), as planned. Customers who had placed pre-orders for one or both of these eagerly anticipated figures were expecting to receive news of their availability. Everything Dinosaur had a release date of 16th April scheduled for these replicas. However, the shipment remains stuck in customs and neither ourselves or Rebor are able to obtain any information as to when these items will be released.

Global Logistics Badly Affected by the Pandemic

We do apologise for this, we are as frustrated as our customers are with regards to this situation. There are severe delays at most ports and global logistics remains under considerable strain due to the pandemic. Whilst we continue to work closely with the port authorities to work towards a resolution, there is, sadly, very little we can do at this moment and this issue is beyond our control. We have therefore decided to push back the release for this figure until May 13th (May 13th, 2021),

Team Members Working Hard to Find a Solution

Once again, we at Everything Dinosaur apologise for the inconvenience and we want to assure you that Rebor and ourselves are doing all we can to get these goods released and delivered to our warehouse.

The other Rebor Compsognathus longipes dissection specimen is also on the same shipment and therefore subject to the same delay. This product also had a release date of 16th April (tomorrow), but due to the on-going issue at the port we have also pushed back the release date for this figure until May 13th (May 13th, 2021).

Everything Dinosaur apologises for the inconvenience and we want to assure you that we are doing all we can to get these goods released and delivered to our warehouse.

At Everything Dinosaur, we work seven days a week and we are doing everything we can to try to resolve this problem. However, there is in reality very little we can do. We thank everyone for their patience and understanding at this difficult time.

Visit the Everything Dinosaur website: Dinosaur and Prehistoric Animal Models.

Still Available for Pre-order

Ironically, both Rebor Oddities Compsognathus longipes figures are still available for pre-order. Whilst Everything Dinosaur will continue to honour all the pre-orders placed by customers for these models and they guarantee that customers will be given the chance to acquire one or both of these figures when they finally arrive in stock, there are a handful of these replicas still available.

To view the Rebor range available from Everything Dinosaur and to pre-order the Rebor Oddities Compsognathus models, visit this section of our website: Rebor Models and Figures.