Rebor 1:35 Scale Replica of Utahraptor (Wind Hunter)

The new Rebor 1:35 scale replica of Utahraptor (U. ostrommaysorum) has an articulated jaw and moveable, feathered arms.  It really is a most beautiful model.  However, a little bit of assembly is required, here is Everything Dinosaur’s quick guide to assembling your Utahraptor.

Rebor Replica Utahraptor

The Rebor 1:35 Scale Utahraptor Replica (Wind Hunter)

Depicting an agile, active dinosaur.

This model is packed into a sturdy padded box (plenty of foam for protection).  Carefully, unpack your parcel’s contents and locate the base.  You should have a small plastic bag stored in a separate foam compartment that contains the two detachable arms and that all important pin to secure the model to its base.

The Rebor Replica Utahraptor “Wings” and the Securing Pin

Check that you have a pin in with the detachable arms. Picture credit: Everything Dinosaur.

Picture credit: Everything Dinosaur

Carefully, secure the arms in place, you can leave them as moveable arms or if you are happy with a particular pose, you can glue the arms in place  if you want to.  Perhaps, professional model makers could use a little filler and re-touching paint to completely obliterate any sign of an articulation/join.

Carefully Push the Arms into Their Respective Sockets

Carefully attach the arms. Picture credit: Everything Dinosaur.

Picture credit: Everything Dinosaur

Then it might be a good idea to remove the clear, plastic band that secured the articulated jaw in place before placing your model into position on its base.  Put the pin into the hole, look for the footprint mark if you struggle to spot it, (a hole is already made for the pin in the base).  Then carefully lower the hind foot onto the pin.  The hind foot has a hole in it and it is this that allows the model to be posed in such a dynamic one-footed stance.

Securing the Replica onto the Base

Pinning a Rebor Utahraptor in place. Picture credit: Everything Dinosaur.

Picture credit: Everything Dinosaur

Really that’s all there is to it, time to relax and enjoy your 1:35 scale Rebor Utahraptor replica, the fearsome “Wind Hunter”.

To view the range of Rebor replicas available at Everything Dinosaur: Rebor Dinosaur and Prehistoric Animal Models.